SDPE Online - Products

Home

Products

Enquiry

Feedback

Contact Us

Products - Anaesthesia Flowmeter - Tubes

These are the dual tapered tubes manufactured precisely for achieving better accuracy & visibility. Each and every tube is crafted individually from Borosilicate glass tubes maintaining high precision internal taper and ground polished end.

Calibration
Flowmeter tubes are series calibrated at all marked scale flow points for discharge in to a standard atmosphere at an operating condition 20OC 1013 m bar, flow is expressed as litres/minute.

Bobin Float
Aluminium alloy anodized red and blue with silver dot for easy observation of rotaion.Tubes and floats are not interchangeable, a unique serial number appears on the tube and float.All tube and float combinations are flow checked at all figured graduations before despatch.

Scale
The flow scale is ceramic permanently fused on the tube, characters and lines are dense black.

Operation
Operating of the tubes can be easily confirmed by checking the position of the bobbin with respect to the scale marking.

LOW FLOW ANAESTHESIA

Code	Gas	Scale	Aر0.4	Bر0.1
SDO010	OXYGEN	1 – 10 L/M	15 mm	11.3 mm
SDO101		0.1-1 L/M	10 mm	6.3 mm
SDAO15	AIR	1 – 15 L/M	15 mm	11.3 mm
SDN010	NITROUS OXIDE	1 – 10 L/M	15 mm	11.3 mm
SDN101		0.1-1 L/M	10 mm	6.3 mm

DUAL TAPER CALIBRATED GLASS TUBES WITH EXTENDED FLOW RANGES

SDO215	OXYGEN	0.2-15 L/M	15 mm	11.3 mm
SDO110		0.1-10 L/M	15 mm	11.3 mm
SDO108		0.1-8 L/M	15 mm	11.3 mm
SDA215	AIR	0.2-15 L/M	15 mm	11.3 mm
SDN101	NITROUS OXIDE	0.2-12 L/M	15 mm	11.3 mm

SOLUTIONS FOR VETERINARY ANAESTHESIA

SDO110.XX	OXYGEN	0.1-10 L/M	15 mm	11.3 mm
SDO105.XX		0.1-5 L/M	15 mm	11.3 mm
SDO101.XX		0.1-1 L/M	10 mm	6.3 mm
SDA15.XX	AIR	1 – 15 L/M	15 mm	11.3 mm
SDA115.XX		0.1-15 L/M	15 mm	11.3 mm
SDN112.XX	NITROUS OXIDE	0.1-12 L/M	15 mm	11.3 mm
SDN105.XX		0.1 – 5 L/M	15 mm	11.3 mm
SDN101.XX		0.1 – 1 L/M	15 mm	11.3 mm

CUSTOMISED TO MEET YOUR REQUIREMENT

CODE	GAS	SCALE	AØ±0.4	Bر0.1	L�1	NSL �5
SDO010.XX	OXYGEN	1 – 10 L/M	15 mm	11.3 mm	260 mm	150 mm
SDO0101XX		0.1-1 L/M	10 mm	11.3 mm	260 mm	150 mm
SDA010.XX	AIR	1-15 L/M	15 mm	11.3 mm	240 mm	150 mm
SDA115.XX		0.1-15 L/M	15 mm	11.3 mm	230 mm	150 mm
SDN010.XX	NITROUS OXIDE	1-10 L/M	15 mm	11.3 mm	250 mm	150 mm
SDN101.XX		0.1-1 L/M	10 mm	6.3 mm	250 mm	150 mm
SDN112.XX		0.1-12 L/M	15 mm	11.3 mm	250 mm	150 mm
SDC102.XX	CARBONDIOXIDE	0.1-2 L/M	15 mm	11.3 mm	240 mm	150 mm

OTHER SPECIFICATION CAN ALSO BE MET

confirms to ISO 5358
Proven in meeting user's requirements.
Permanent ceramic marking fused to glass.
Bobbin float aluminium alloy anodized red/blue, with silver dot for easily observing rotation.
Special design float for rapid response to flow change.
Machine manufacturer's logo printed if required.
Colour coding for each gas.

Back

Download Broucher | Send Enquiry